关于加强保险业信息化工作重大事项管理的通知
作者:法律资料网 时间:2024-05-19 16:50:21 浏览:8850
来源:法律资料网
下载地址: 点击此处下载
关于加强保险业信息化工作重大事项管理的通知
关于加强保险业信息化工作重大事项管理的通知
保监厅发〔2007〕8号
各保险集团（控股）公司、保险公司、保险资产管理公司：
为贯彻落实《中国保险业发展“十一五”规划信息化重点专项规划》，防范化解信息技术风险，进一步加强并规范保险业信息化工作重大事项的管理，现就有关要求通知如下：
一、各公司应高度重视保险信息化工作重大事项的管理，按照“谁主管、谁负责，谁运营、谁负责”的原则，加强组织领导，完善工作机制，落实责任，切实做好重大事项的报告和及时处置工作。
二、各公司应向中国保监会及时报告下列信息化相关的工作及重大事项：
（一）信息化发展战略、规划的正式形成或重大修订；（15个工作日内上报）
（二）信息化工作上一年度总结及本年度工作计划；（每一年度的第一季度内上报）
（三）数据中心、灾备中心新建或迁移计划的正式形成，新数据中心、灾备中心的正式启用；（15个工作日内上报）
（四）对公司经营管理有重大影响的信息系统建设或改造；（随时上报）
（五）公司信息化工作主要负责人、信息技术部门主要负责人和联系人的变更等；（5个工作日内上报）
（六）其它需要报告的重要事项。
三、各公司发生下列网络与信息安全重大事件时，应立即采取措施，妥善处置，并在24小时内向中国保监会报告：
（一）网络中发生有害信息或计算机病毒的大规模传播；
（二）网络或信息系统发生重大系统性故障，造成应用服务中断四小时以上或数据篡改、丢失；
（三）已经确定或可能遭受网络与系统入侵、网络诈骗、网络侵财、网络恐怖等违法犯罪活动；
（四）其它影响网络与信息安全的重大事件。
报告内容包括事件类型、影响范围、损失及危害情况、分析研判结果和已采取的措施等。
四、各公司应于2007年3月31日前将2006年信息化工作总结和2007年工作计划、信息化工作主要负责人、信息技术部门负责人及联系人的联系方式（手机、座机、传真以及邮箱地址）报送中国保监会统计信息部。
联系人：朱培标
联系电话：010-66286106010-66288109（传真）
24小时值班电话：010-66286355010-66286688转值班室
二○○七年三月五日
下载地址: 点击此处下载
关于印发《海域使用权登记办法》的通知
关于印发《海域使用权登记办法》的通知
沿海省、自治区、直辖市海洋厅（局）：
为了贯彻实施《中华人民共和国海域使用管理法》，规范海域使用权登记工作，完善海域使用权登记制度，维护国家海域所有权和海域使用权人的合法权益，国家海洋局制定了《海域使用权登记办法》。现将《海域使用权登记办法》印发你们，请遵照执行。
国家海洋局
二○○六年十月十三日
海域使用权登记办法
第一章 总则
第二章 登记
第一节 初始登记
第二节 变更登记
第三节 注销登记
第四节 其他
第三章 登记资料的管理和查询
第四章 罚则
第五章 附则
第一章 总 则
第一条 为了加强海域使用权管理，完善海域使用权登记制度，维护国家海域所有权和海域使用权人的合法权益，根据《中华人民共和国海域使用管理法》，制定本办法。
第二条 海域使用权登记是指依法对海域的权属、面积、用途、位置、使用期限等情况以及海域使用权派生的他项权利所作的登记，包括海域使用权初始登记、变更登记和注销登记。
他项权利，是指出租、抵押海域使用权形成的承租权和抵押权。
第三条 海域使用权及他项权利的取得、变更、终止应当依照本办法进行登记。依法登记的海域使用权及他项权利受法律保护，任何单位和个人不得侵犯。
海域使用权登记册是海域使用权及他项权利的法律依据。
第四条 海域使用权登记以宗海为基本单位。
权属界址线所封闭的用海单元称宗海。但填（围）海造地的，应独立分宗登记。
单位和个人取得两宗以上海域的，应当按宗分别申请登记。
两个以上海域使用人使用同一宗海域的，应当共同申请登记。
第五条 海域使用权按照审批权限实行分级登记。
国务院批准的项目用海，由国家海洋行政主管部门登记造册；县级以上地方人民政府批准的项目用海，由批准用海的地方人民政府登记造册，同级海洋行政主管部门负责具体登记工作（以下简称登记机关）。
变更登记、注销登记和他项权利登记由原海域使用权登记机关办理。
第六条 海域使用权申请人、中标人或者买受人提出登记申请。
依据海域法第二十二条的规定确定给集体经济组织或者村民委员会的海域使用权由集体经济组织或者村民委员会提出登记申请。
设定他项权利的，由双方共同提出登记申请。
第七条 海域使用权登记申请可以委托他人代理。代理人应当出具本人身份证明并提交授权委托书。境外委托人的授权委托书应当按照有关规定经过公证或者认证。
第八条 登记机关应当在海域使用权登记后进行公告。
第二章 登 记
第一节 初始登记
第九条 通过申请审批或者招标拍卖方式确定海域使用权后，申请人应当提出初始登记。
第十条 初始登记申请材料包括：
（一）海域使用权登记申请表；
（二）营业执照、法定代表人身份证明、个人身份证明；
（三）宗海界址图（包括宗海位置图和平面图）；
（四）项目用海批复或者海域使用权出让合同；
（五）海域使用金缴纳凭证。
第十一条 出租、抵押海域使用权的，双方当事人应当在签订租赁、抵押协议之日起三十日内到原登记机关办理出租、抵押登记。
第十二条 登记机关应当在受理申请后十日内进行登记，颁发海域使用权证书。
第二节 变更登记
第十三条 下列情形之一的，海域使用权人应当申请变更登记：
（一）海域使用权续期的；
（二）改变海域使用位置、面积或者期限的；
（三）地址或者法定代表人发生变化的；
（四）填（围）海造地项目已竣工验收的；
（五）其他形式的变更。
第十四条 有下列情形之一导致海域使用权人变更的，当事人应当申请变更登记：
（一）因企业合并、分立或者与他人合资、合作经营的；
（二）依法转让海域使用权的；
（三）依法继承海域使用权的；
（四）因行政机关调解而引起海域使用权转移的；
（五）因人民法院判决、裁定、调解或仲裁裁决而引起海域使用权转移的；
（六）海域使用权人名称改变的；
（七）其他形式的变更。
第十五条 变更登记应当在有关文书生效或者签订之日起三十日内向原登记机关申请。但依法批准的变更，应当在变更批准文件规定的期限内办理变更登记。
第十六条 变更登记材料包括：
（一）海域使用权登记申请表；
（二）营业执照、法定代表人身份证明、个人身份证明；
（三）海域使用权证书；
（四）海域使用金缴纳凭证；
（五）有关证明文件（转让协议、继承证明、调解书、更址更名证明等）；
（六）依法批准的变更，还应当提交变更批准文件。
第十七条 登记机关应当在受理申请后十日内办理变更登记。必要时，登记机关应当组织开展海籍调查工作。
不予变更登记的，登记机关依法告知申请人。
第十八条 第十四条第五款规定的变更，登记程序另行规定。
第三节 注销登记
第十九条 海域使用权人申请注销登记应当提交下列材料：
（一）海域使用权登记申请表；
（二）营业执照、法定代表人身份证明、个人身份证明；
（三）海域使用权证书；
（四）说明注销原因的有关材料；
（五）海域使用金缴纳凭证。
登记机关审查核实后办理注销登记。
第二十条 下列情形之一的，登记机关直接办理注销登记：
（一）县级以上人民政府依法收回海域使用权的；
（二）海域使用权期限届满，未申请续期或者续期申请未获批准的；
（三）填（围）海造地项目已竣工验收并办理相关手续的；
（四）海域使用权人放弃海域使用权的；
（五）海域使用权人死亡，且无人继承的。
第二十一条 他项权利注销的，双方当事人应当提交下列材料:
（一）海域使用权登记申请表；
（二）营业执照、法定代表人身份证明、个人身份证明；
（三）海域使用权证书;
（四）出租、抵押协议。
第四节 其他
第二十二条 登记申请有下列情形之一的，登记机关不予受理：
（一）不在登记权限内的；
（二）提供的材料不齐全的；
（三）出租、抵押期限超过海域使用权期限的；
（四）其他依法不予受理的。
第二十三条 下列情形之一的，登记机关暂缓登记，并在收到登记申请后五日内通知申请人：
（一）海域使用权属争议尚未解决的；
（二）有违法行为尚未处理或正在处理的；
（三）依法查封用海设施、构筑物而限制海域使用权的；
（四）其他依法暂缓登记的。
第二十四条 因人民法院查封财产导致海域使用权冻结的，登记机关应当及时标注。
第二十五条 海域使用权人或者利害关系人发现登记有误，可以持以下材料向原登记机关申请更正。经审核属实的，予以更正：
（一）海域使用权登记申请表；
（二）营业执照、法定代表人身份证明、个人身份证明；
（三）海域使用权证书；
（四）证明更正内容真实性的材料。
第二十六条 登记机关发现登记有误的，应当及时更正，并通知海域使用权人。
第三章 登记资料的管理和查询
第二十七条 登记过程中形成的资料，包括海域使用权登记册和原始登记资料（以下简称登记资料），应当永久保存。
海域使用权登记册由海域使用权登记表组成，按海域使用权登记编号顺序排列，设正、副本，每年度形成一册。
第二十八条 海域使用权登记资料实行属地管理。
直辖市、设区的市海洋行政主管部门负责管理海域内登记资料的管理，县（市） 海洋行政主管部门负责管理海域内登记资料的管理。
国家海洋行政主管部门负责将海域使用权登记表副本按月移交省级海洋行政主管部门；省、自治区海洋行政主管部门应当将本级的和国家海洋行政主管部门移交的海域使用权登记表副本按月移交设区的市或县（市）海洋行政主管部门。
第二十九条 单位和个人（以下简称查询人）可以查询海域使用权登记册；
海域使用权人或者他项权利人可以自行或者委托查询其海域权利范围内的原始登记资料；
国家安全机关、公安机关、检察机关和审判机关可以查询与案件有关的原始登记资料。
查询资料涉及国家秘密的，按照国家有关保密的法律法规执行。
第三十条 查询登记资料的，应当填写查询申请表，并提交有关身份证明。
查询原始登记资料的，还应当提交海域权利人权利凭证、权利人同意查询的证明文件。国家安全机关、公安机关、检查机关和审判机关应当提交单位证明和个人身份证明。
第三十一条 符合规定条件的，登记机关当场提供查询；不能当场查询的，应当在五日内提供查询。
下列情形之一的，不予查询：
（一）申请查询的海域不在本登记区内的；
（二）未提交有效身份证明和权利凭证的；
（三）申请查询的内容超出本办法规定的查询范围的；
（四）法律法规规定不予查询的。
第三十二条 查询人可以摘录或者复制有关登记资料，所发生的费用由查询人承担。
第四章 罚则
第三十三条 骗取海域使用权登记的，登记机关应当撤销有关登记内容，并根据情节追究其责任。
第三十四条 未按规定申请初始登记使用海域的，按照海域法第四十二条处理；
未按规定申请变更登记，从事经营活动有违法所得的，没收违法所得，责令办理登记。
第三十五条 登记机关工作人员徇私舞弊、滥用职权、玩忽职守的，依法给予行政处分；构成犯罪的，依法追究刑事责任。
第五章 附 则
第三十六条 从事海域使用权登记工作的人员应当经过培训，持证上岗。
第三十七条 海域使用权登记的有关文书格式由国家海洋行政主管部门统一制定。
第三十八条 本办法自2007年1月1日起施行。2002年国家海洋局发布的《海域使用权登记办法》（国海发[2002]23号），自本办法实施之日起废止。
STANDARDIZATION LAW OF THE PEOPLE'S REPUBLIC OF CHINA ——附加英文版
STANDARDIZATION LAW OF THE PEOPLE'S REPUBLIC OF CHINA
(Adopted at the Fifth Meeting of the Standing Committee of the
Seventh National People's Congress on December 29, 1988, promulgated by
Order No. 11 of the President of the People's Republic of China on
December 29, 1988, and effective as of April 1, 1989)
Contents
Chapter I General Provisions
Chapter II Formulation of Standards
Chapter III Implementation of Standards
Chapter IV Legal Responsibility
Chapter V Supplementary Provisions
Chapter I General Provisions
Article 1
This Law is formulated with a view to developing the socialist commodity
economy, promoting technical progress, improving product quality,
increasing social and economic benefits, safeguarding the interests of the
State and the people and suiting standardization to the needs in socialist
modernization and in the development of economic relations with foreign
countries.
Article 2
Standards shall be formulated for the following technical requirements
that need to be unified:
(1) the varieties, specifications, quality and grades of industrial
products as well as the safety and sanitary requirements for them;
(2) the design, production, inspection, packing, storage, transportation
and methods of operation of industrial products as well as the safety and
sanitary requirements for them in the process of production, storage and
transportation;
(3) technical requirements and testing methods related to environmental
protection;
(4) the designs, construction procedure and safety requirements for
construction projects; and
(5) technical terms, symbols, code names and drawing methods related to
industrial production, project construction and environmental protection.
Major agricultural products and other items that need to be standardized
shall be designated by the State Council.
Article 3
The tasks of standardization shall include the formulation of standards
and organization of and supervision over the implementation of the
standards. Standardization shall be incorporated in the plan for national
economic and social development.
Article 4
The State shall encourage the active adoption of international standards.
Article 5
The department of standardization administration under the State Council
shall be in charge of the unified administration of standardization
throughout the country. Competent administrative authorities under the
State Council shall, in line with their respective functions, be in charge
of standardization in their respective departments and trades.
The departments of standardization administration of provinces, autonomous
regions and municipalities directly under the Central Government shall be
in charge of the unified administration of standardization within their
respective administrative areas. Competent administrative authorities
under the governments of provinces, autonomous regions and municipalities
directly under the Central Government shall, in line with their respective
functions, be in charge of standardization in their respective departments
and trades within their respective administrative areas.
The standardization administration departments and the competent
administrative authorities of cities and counties shall, in line with
their respective functions as assigned by the governments of provinces,
autonomous regions and municipalities directly under the Central
Government, be in charge of standardization within their respective
administrative areas.
Chapter II Formulation of Standards
Article 6
National standards shall be formulated for the technical requirements that
need to be unified nationwide. National standards shall be formulated by
the department of standardization administration under the State Council.
Where, in the absence of national standards, technical requirements for a
certain trade need to be unified, trade standards may be formulated. Trade
standards shall be formulated by competent administrative authorities
under the State Council and reported to the department of standardization
administration under the State Council for the record, and shall be
annulled on publication of the national standards. Where, in the absence
of both national and trade standards, safety and sanitary requirements for
industrial products need to be unified within a province, an autonomous
region or a municipality directly under the Central Government, local
standards may be formulated. Local standards shall be formulated by
departments of standardization administration of provinces, autonomous
regions and municipalities directly under the Central Government and
reported to the department of standardization administration and the
competent administrative authorities under the State Council for the
record, and shall be annulled on publication of the national or trade
standards.
Where, in the absence of both national and trade standards for products
manufactured by an enterprise, standards for the enterprise shall be
formulated to serve as the criteria for the organization of production. An
enterprise's standards for its products shall be reported to the
standardization administration department and the competent administrative
authorities under the local government for the record. Where national or
trade standards have been formulated, the State shall encourage
enterprises to formulate their enterprise standards, which are more
stringent than the national or trade standards, to be used in these
enterprises.
Where the formulation of standards is otherwise provided for by law, such
legal provisions shall be complied with.
Article 7
National standards and trade standards shall be classified into compulsory
standards and voluntary standards. Those for safeguarding human health and
ensuring the safety of the person and of property and those for compulsory
execution as prescribed by the laws and administrative rules and
regulations shall be compulsory standards, the others shall be voluntary
standards.
The local standards formulated by standardization administration
departments of provinces, autonomous regions and municipalities directly
under the Central Government for the safety and sanitary requirements of
industrial products shall be compulsory standards within their respective
administrative areas.
Article 8
The formulation of standards shall be conducive to ensuring safety and the
people's health, safeguarding consumer interests and protecting the
environment.
Article 9
The standards to be formulated shall be conducive to a rational use of the
country's resources, a wider utilization of scientific and technological
gains and the enhancement of economic returns, conform to operation
instructions, increase the universality and interchangeability of
products, and be technologically advanced and economically rational.
Article 10
The standards to be formulated shall be coordinated with and supported by
related standards.
Article 11
The standards to be formulated shall help promote economic and
technological cooperation with foreign countries and foreign trade.
Article 12
The roles of trade associations, scientific research institutions and
academic organizations shall be brought into play in the formulation of
standards. A department engaged in the formulation of standards shall
organize a committee on standardization technology composed of
specialists, which shall be responsible for the drafting of the standards
and shall participate in the examination of the draft standards.
Article 13
After the standards come into force, the department that formulated them
shall, in the light of scientific and technological developments and the
needs in economic construction, make timely reviews of the current
standards to determine if they are to remain effective or are to be
revised or annulled.
Chapter III Implementation of Standards
Article 14
Compulsory standards must be complied with. It shall be prohibited to
produce, sell or import products that are not up to the compulsory
standards. With regard to voluntary standards, the State shall encourage
their adoption by enterprises on an optional basis.
Article 15
With respect to products for which national or trade standards have been
formulated, enterprises may apply to the standardization administration
department under the State Council or agencies authorized by the same
department for product quality authentication. For products which are
authenticated to conform to the standards, certificates shall be issued by
the department that made the authentication and the use of the prescribed
authentication marks shall be permitted on such products and the packing
thereof.
If products for which authentication certificates have been granted do not
conform to national or trade standards, or if products have not undergone
authentication or found not up to the standards after the authentication
proceedings, no authentication marks shall be permitted for use on such
products leaving factories for sale.
Article 16
Technical requirements for export products shall comply with contractual
provisions.
Article 17
The development of new products, improvement of products or technical
renovation by an enterprise shall conform to standardization requirements.
Article 18
Departments of standardization administration under governments at or
above the county level shall be responsible for supervision over and
inspection of the implementation of the standards.
Article 19
Departments of standardization administration under governments at or
above the county level may, in accordance with needs, establish inspection
organizations or authorize inspection organizations of other units to
examine whether products conform to the standards. Where the laws and
administrative rules and regulations provide otherwise on inspection
organizations, such provisions shall apply.
Disputes over whether a product conforms to the standards shall be handled
in accordance with the inspection data provided by the inspection
organizations as specified in the preceding paragraph.
Chapter IV Legal Responsibility
Article 20
Whoever produces, sells or imports products that do not conform to the
compulsory standards shall be dealt with according to law by the competent
administrative authorities as prescribed by the laws and administrative
rules and regulations. In the absence of such prescriptions, his products
and unlawful proceeds shall be confiscated and he shall be concurrently
fined by the administrative authorities for industry and commerce; where
serious consequences are caused and crimes are constituted, the person
directly responsible shall be investigated for criminal responsibility in
accordance with the law.
Article 21
Where authentication marks are used on products leaving a factory for
sale, for which authentication certificates have been issued but which do
not conform to national or trade standards, the enterprise concerned shall
be ordered by the department of standardization administration to stop the
sale and shall be fined concurrently; where the circumstances are serious,
the authentication certificates shall be revoked by the department that
made the authentication.
Article 22
Whoever uses authentication marks, without authorization, on products
leaving a factory for sale, which have not undergone authentication or
have been found not up to the standards after the authentication
proceedings, shall be ordered by the department of standardization
administration to stop the sale and shall concurrently be fined.
Article 23
A party which refuses to accept the punishment of confiscation of its
products and of its unlawful proceeds and a fine may, within 15 days of
receiving the penalty notice, apply for reconsideration to the office
immediately above the one that made the punishment decision; a party which
refuses to obey the reconsideration decision may, within 15 days of
receiving the reconsideration decision, bring a suit before a people's
court. The party also may, within 15 days of receiving the penalty notice,
directly bring a suit before a people's court. If a party neither applies
for reconsideration nor brings a suit before a people's court within the
prescribed time nor complies with the punishment decision, the office that
made the punishment decision shall apply to a people's court for
compulsory execution.
Article 24
Personnel responsible for the supervision, inspection and administration
of standardization who violate the law or neglect their duties, or are
engaged in malpractices for personal gains, shall be given disciplinary
sanctions; where crimes are constituted, their criminal responsibility
shall be investigated in accordance with the law.
Chapter V Supplementary Provisions
Article 25
Rules for the implementation of this Law shall be formulated by the State
Council.
Article 26
This Law shall go into effect as of April 1, 1989.
Important Notice:
This English document is coming from the "LAWS AND REGULATIONS OF THE
PEOPLE'S REPUBLIC OF CHINA GOVERNING FOREIGN-RELATED MATTERS" (1991.7)
which is compiled by the Brueau of Legislative Affairs of the State
Council of the People's Republic of China, and is published by the China
Legal System Publishing House.
In case of discrepancy, the original version in Chinese shall prevail.
